Epoxy Group
Liquid Glass Epoxy
Double component solvent-free epoxy resin based, decorative transparent epoxy resin.
- It is used as a transparent epoxy for decorative coatings.
- It provides excellent adhesion to all kinds of surfaces except plastic.
- It is a Double Component.Both components have Ultra transparency feature.
- It is suitable for use on floor surfaces, but the floor must be abraded before application.Surface preparation and surface cleaning are very important. (Please contact the company about this and get technical support information)
- It is also suitable for furniture casting resin.
- It has excellent compatibility in water resistance.
- It does not get up over time from the surface it adheres to.
- Foot slip is not experienced when applied to floors.
- 3d epoxy coating the desired areas,
- Bijouterie products.
Method of Application:
- The application Ambient Temperature should be less than 10 °C. E. The relative humidity of the air is very important.
- If there is rainy weather, it is not applied in the open area.
- For a good application result, surface cleaning before application is very important.
Epoxy Self Leveling Coating
On floor surfaces, double component solvent-free epoxy resin based coating thickness of 1-3 mm is suitable for the desired coatings. It is recommended that the applications are made with a special team.
- It is not affected by chemical substances,
- Easy to clean, High mechanical strength.
- When the use starts after the application, there is no foot slip.
- The dust-proof floor is ideal for use in desired environments.
- The price varies according to the desired color cartels.
- It has two components
Epoxy Top Coat Orange Peel Pattern Textured Coating
Double component, solvent-free epoxy resin content top coat orange peel pattern is for the desired coatings.
- Suitable for all kinds of Industrial coatings.
- The adhesion strength is high.
- It’Its mechanical strength and abrasion resistance are high. The stain cannot be held. It is easy to clean.
Shore D Hardness (EN ISO 1542)
Adhesion Strength (TS EN ISO1542)
Compressive Strength (TS EN 12190)
Bending Strength (TS EN 12190)
Tensile strength (DIN 53504 )
Liner
Dual component, ready-to-use epoxy mezzanine Decking .
It is used in Epoxy and Polyurethane coatings to increase the strength between the primer and the top Decking.
- Appearance : Bright
- Density : 1.55G/cm3
- Waiting time between Decking: 8 hours / 25°C
Primer / Solvent-Free
Double component, solvent-free epoxy impregnated resin.
Impregnated epoxy is used on epoxy-based mortars or to seal fine pores and cracks before applying epoxy, polyurethane, polyurea top coatings.
- Appearance : Bright
- Color Transparent
- Density : 1.10 G/cm3
- Decking standby : 8 hours / 25°C
Epoxy Coating with Glass Flakes in Silo
Two component high wear resistant composite coating.
Primer
Polling Paste
Intermediate Coat Epoxy
Top Coat